Schock 40 Class Rules

SCHOCK 40 CLASS ASSOCIATION
BYLAWS, RULES, AND SPECIFICATIONS
- A
- BYLAWS
- A.1
- NAME
- A.1.1
- The name of the organization shall be the Schock 40 Class Association, referred to
hereinafter as "the Association".
- A.1.2
- Generally, in these Bylaws, Rules, and Specifications, the Bylaws define the structure
and governance of the Association, the rules govern the people who may participate in
Class Races, and the Specifications govern the yachts eligible to participate in Class
and Mixed Fleet Races. This document if hereinafter referred to as the Rules.
- A.2
- NATURE AND PURPOSE
- A.2.1
- The Schock 40 Class Association is a voluntary Corinthian association. Its purpose
is to promote the continued enjoyment of Schock 40 Class Yachts in fair, Corinthian,
one-design and mixed fleet racing, and to promote friendship among their owners and crews.
- A.3
- LANGUAGE
- A.3.1
- The official language of the Association shall be English. In these Rules, the word "shall" is
mandatory; the word "may" is permissive; the word "he" means he, she, or they; and word "his" means
his, hers, their, or theirs.
- A.4
- MEMBERSHIP
- A.4.1
- The Association is comprised of Class Owners, Associate Members, and Charterers.
- A.4.1.a
- Class Owner: A Class Owner (Owner) is a person who (or whose spouse) is the registered
owner of public record of a Schock 40 sailboat, who voluntarily joins the Association
to support its purposes, and whose Association dues are currently paid.
- A.4.1.a.i
- Each Class Yacht shall have only one Owner under these Rules. In the case of multiple
legal owners, the Owner is the individual having the largest ownership share. Equal partners
shall designate which is the Owner.
- A.4.1.b
- Associate Member: An Associate Member is a person, who crews on a Class Yacht, voluntarily
supports the purposes of the Association and the Intent of these Rules, has been accepted
by the Board, and whose Association dues are currently paid.
- A.4.1.c
- Charterer: A Charterer is a person, who has chartered a Schock 40 sailboat, who voluntarily
joins the Association to support its purposes, and whose dues are currently paid. A Charterer
shall be afforded all of the rights, privileges, duties and obligations available to
an Owner, except that he shall not vote. He shall not be exempt from the provisions
in Section B.2.
- A.4.1.c.i
- In order to be eligible to participate in any Championship Regatta (Section A.9), a
Charterer who is not an Owner must have been a charterer of that yacht for at least 6
months provision shall not apply to a Charterer who is an Owner under Section A.4.1.a.i.
- A.5
- GOVERNANCE
- A.5.1
- Board of Directors (Board): The governing body of the Association is the Board of Directors
(Board), comprised of the Directors and Immediate Past President, and chaired by the
President, all of whom are entitled to vote. The general duty of the Board is the furtherance
of the purposes of the Association, and ensuring its growth and preservation. The Board
develops, interprets, and enforces the Association Rules, and works with the Builder
to ensure a continuing source of Schock 40 Class Yachts. The Board shall decide on all
Rules and be ultimately responsible for resolving issues about their interpretation.
- A.5.1.a
- Director: A Director is the person elected by a Fleet or appointed by the Board, who
represent both that Fleet and also the Class as a whole on the Board. Directors shall
serve two-year terms and may be re-elected or re-appointed.
- A.5.1.b
- Alternate Director: An Alternate Director is the person elected by a Fleet or appointed
by the Board to assist in representing both that Fleet and also the Class as a whole
on the Board. He may participate in the deliberations of the Board and, in the absence
of his Fleet's Director, may vote and act as its Director. Alternate Directors serve
one-year terms and may be re-elected or re-appointed.
- A.5.1.c
- President: The president is the person elected by the Class or appointed by the Board
to act as the executive officer of the Board and Class. He is a director-at-large. The
President shall serve a one-year term and may be re-elected or re-appointed.
- A.5.1.d
- Immediate Past President: The Immediate Past President is the past President who was
most recently in office.
- A.5.2
- Measurer and Assistant Measurer: A Measurer shall be, and Assistant Measurer(s) may
be appointed by the Board. Their duties concern the conformance of yachts, equipment,
and crews to the Rules. The Measurer shall serve as a voting member of the Rules Committee,
and as a non-voting member of the Board.
- A.5.3
- Rules Committee: The Rules Committee is comprised of one person from W.D. Schock Corporation,
one person from DynaYacht, and 2 persons appointed by the Board to develop or revise
the Bylaws, Rules, and specifications. Proposed changes in these Rules shall be submitted
for consideration by the Board.
- A.5.4
- The Owner of each Schock 40 may cast one vote in Association elections.
- A.5.5
- Rule Changes
- A.5.5.a
- Any changes in these Rules shall require 2/3 majority vote of the Board or a 2/3 majority
vote of the ballots cast by the Owners.
- A.5.5.b
- The Directors shall vote on an issue first. If the Directors fail to achieve a 2/3
majority, the Board shall decide, by a simple majority, whether to place the issue to
a vote of the Owners. A written petition signed by 1/3 of the Owners shall obligate the
Board to conduct a vote by the Owners.
- A.5.5.c
- All Board decisions shall require a simple majority vote unless otherwise specified.
- A.6
- DUES: Dues shall be $150.00 a year.
- A.6.1
- The Board shall establish the amount of annual dues and their due date.
- A.7
- FLEETS AND FLEET TERRITORIES
- A.7.1
- Fleet: The Board may charter a Fleet when five or more Schock 40 sailboats are berthed
within a given Territory. New Territories and new Fleets may be created as Class membership
and demographics change.
- A.8
- CLASS RACES, CLASS REGATTAS
- A.8.1
- Each race or regatta so designated by the Board or by a Fleet is a Class Race or a
Class Regatta, whose races are Class Races.
- A.9
- CHAMPIONSHIP REGATTAS
- A.9.1
- National Championship: The National Championship is the most important Class Regatta
and is to be held annually at a date and location to be set by the Board. If possible
the Board shall determine its location. The winner shall be declared the Schock 40 National
Champion and shall affix a gold Schock 40 insignia, with the last two digits of the year
it was won below it in blue, to his boat's mainsail in place of the standard insignia
(C.7.6)
- A.9.2
- The Pacific Coast Championship: The Pacific Coast Championship is the second most important
Class Regatta, and is to be held annually at a date and location to be determined by
the Board. The winner shall be declared the Pacific Coast Champion and shall affix a
blue Schock 40 insignia, with the last two digits of the year it was won below it in
blue, to his boat's mainsail in place of the standard insignia (C.7.6).
- A.9.3
- Fleet Championships: Each Fleet may hold a Fleet Championship in a location, time(s),
and format to be determined by the Fleet. The winner is declared the Fleet Champion,
and shall affix a red chevron to his boat's mainsail under the standard insignia.
- A.9.4
- The insignias emblematic of these championships shall remain with the Owner if the
yacht is sold; if the Owner then purchases another Class Yacht, the insignia(s) shall
be affixed to the new yacht's mainsail. Only the highest award achieved shall be displayed.
- A.10
- ELIGIBILITY TO RACE AND CONFORMANCE TO RULES
- A.10.1
- Class Yacht: A Schock 40 Class Yacht (Class Yacht) is defined as a Schock 40 sailboat
manufactured by the W.D. Schock corporation and which is in conformance with these
- Rules: Only Class Yachts whose Owner's dues are paid are eligible to race in Schock
40 Class Races.
- A.10.2
- Owner's responsibility: It shall be the Owner's responsibility to ensure that each
member of his crew, including helmsman, and his Class Yacht conform to these Rules while
underway for the purpose of racing in any Class Race. An Owner not discharging this responsibility
shall retire from any Class Race.
- A.11
- BOARD DECISIONS
- A.11.1
- Standing decisions of the Board shall be published in the Class Newsletter and/or in
the Class Yearbook-Roster for information of the members of the Association.
- B
- RULES
- B.1
- BASIC PRINCIPLES AND INTENT OF THESE RULES
- B.1.1
- The Association sets forth these Rules in order to maintain fair racing among Class
Yachts and to control and promote the Class Yacht as a one-design racing yacht.
- B.1.2
- To ensure fair Class Racing, it is the intent of these Rules and Specifications that
The yachts have equal potential speed when they are well prepared and well maintained.
These Rules intend that no racing advantage be attainable from the absence of features
or equipment nor from modifications to the hull and rigging which makes the yacht deviate
from the standard Schock 40. Furthermore, it is the intent of these Rules to equalize
the potential speed of the participating yachts so that the skill of the skipper and
crew in tuning, maintaining, and racing the yacht are the major factors in the outcome
of Class Races.
- B.1.3
- The Class promotes and regulates Class Racing solely for the pleasure of Owners, their
families, and sailing friends. The Class recognizes several general objectives:
- B.1.3.a
- The Class intends to promote Class Racing at the highest level of racing skill that
Corinthian sailors can realistically expect to attain. A Corinthian sailor races solely
for personal pleasure. Other matters such as a non-racing business or a profession has
consistently higher claims to his efforts than does racing. He may have raced for may
years, but lacks full immersion in racing with its honing of techniques and skills.
- B.1.3.b
- The Class intends that Corinthian sailors have a realistic chance of winning race prizes
through their own efforts on the race course, and also that Owners not be at a competitive
disadvantage as a consequence of including family and sailing friends in their crew.
- B.1.4
- These Rules intend that the Designated Helmsman (Section B.2.2) of a Class Yacht be
a stable and enduring member of that yacht's crew. Therefore, the use of special personnel
for a few important regattas only is contrary to the intent of these Rules.
- B.1.5
- The specific provisions of these Rules are requirements and guides for most common
situations. However, in situations of ambiguity of interpretation, the intent of the
Rules as stated in Section B.1 shall prevail. Changes or innovation in yachts not specifically
covered by these Rules are not allowable unless declared allowable in writing by the
Board, or by the Measurer operating as the Board's representative.
- B.2
- RACE PARTICIPATION RULES
- B.2.1
- Eligible Helmsman: An Eligible Helmsman is an Owner, a Charterer, or a Designated Helmsman.
- B.2.2
- Designated Helmsman: A Class Yacht's Designated Helmsman (DH) is a person who shall:
- B.2.2.a
- be a Regular Crewmember of that Class Yacht.
- B.2.2.b
- be an Associate Member in good standing unless he is the Owner's child under age 19.
- B.2.2.c
- not be a Designated Helmsman for another Class Yacht.
- B.2.2.d
- have been proposed by the Owner and approved by the Board for the current season in
accordance with B.2.2f.
- B.2.2.e
- proposal and approval of DH status.
- B.2.2.f.i
- To assist the Board's decision, Owners may timely provide the Board with written information
about persons proposed.
- B.2.2.f.ii
- The Board shall approve or disapprove DH status for each person "posted". A 2/3 majority
vote is required for approval.
- B.2.2.f.iii
- Appeals: Any owner may appeal to the Board, in writing the DH status of persons approved
or disapproved by the Board.
- B.2.3.a
- To be eligible to steer in any Championship event listed in Section A.9, a Class Yacht's
DH shall have raced aboard that yacht in ten races during the 12 month period preceding
the event.
- B.2.3.b
- The DH of a recently built or purchased yacht which has raced less than ten races before
such Championship event must have raced aboard that yacht in all its races.
- B.2.4
- The classifications in Sections B.1.3 shall be interpreted in light of the Intent of
these Rules, especially Section B.1.3.
- B.3
- CREW LIMITATIONS
- B.3.1
- Total crew combined weight aboard shall not exceed 1536 lbs. for championship regattas
only.
- C
- SPECIFICATIONS
- C.1
- CLASS YACHT
- C.1.1
- These specifications define and control the Schock 40 Class Yacht which is the only
boat permitted to race in Class Races. Portions of the design and specifications of the
Schock 40 sailboat, and of the manufacturing techniques and tooling of the W.D. Schock
Corporation (Builder), are implied to be a part of these Rules
- C.1.1a
- Whether racing in Class Races or mixed fleet handicap or other races, a Schock 40 is
by definition built by the W.D. Schock Corporation according to the design by Dynayacht
incorporating the patented CBTF (Canting Ballast Twin Foil) system. Full use of the CBTF
system in permitted and encouraged while racing.
-
- The Following changes (C1.2 & C 1.3) are made pursuant to Racing Rule of Sailing
(RRS) 86.1c and apply to Schock 40's sailing both in one design class races and also
in mixed fleet handicap races
- C.1.2
- RRS 51 MOVABLE BALLAST is changed to read: "Movable ballast shall be properly
stowed, and water, dead weight or ballast shall not be moved for the purpose of changing
trim or stability except for the CBTF system. Floorboards,bulkheads, doors, stairs and
water tanks shall be left in place and all cabin fixtures kept on board. It is specifically
permitted to employ the boat's CBTF system as manufactured for the adjustment of righting
moment by moving the central ballast strut."
- C.1.3
- RRS 52 MANUAL POWER A is changed to read: "A boat's standing rigging, running
rigging, spars and movable hull appendages other than the CBTF system shall be adjusted
and operated only by manual power. It is specifically permitted to use the electrically
driven hydraulic system as manufactured to adjust and operate the central ballast strut
of the boat's CBTF system".
- C.2
- MEASUREMENT
- C.2.1
- Supplemental measurements: The Measurer or Assistant Measurer may take supplemental
measurements sufficient to ensure that the construction of the yacht, and equipment aboard,
conform to these Rules.
- C.2.2
- Vested Interest: The measurer or Assistant Measurer shall not measure a yacht, spars,
sails, or equipment owned or built by himself, or in which he is an interested party
or has a vested interest.
- C.3
- REGISTRATION
- C.3.1
- No boat shall be deemed to be a Schock 40 Class Yacht until it has been completed with
a building number assigned by the W.D. Schock Corporation, and molded into the transom.
Any alteration to the hull, keel, rudder, or spars may invalidate a yacht.
- C.4
- CONSTRUCTION
- C.4.1
- Molded parts.
- C.4.1.a
- Master plugs or patterns shall not be altered or replaced, and replacement production
molds shall not be used, until approved by both the W.D. Schock Corporation and the Association.
- C.4.1.b
- The shape of molded parts, including hull, deck, interior, main hatch, ballast, and
rudders shall be that shape defined by the production mold. Modification of the shape
of any molded part, other than by fairing to bring it to the shape defined or intended
by the production mold, is prohibited.
- C.4.2
- Hull and deck: Hull and deck construction shall be in accordance with approved laminates
and cores, general arrangement, construction plans and techniques, and specifications
approved by the W.D. Schock Corporation and the Class Association. Any modification of
the hull other than fairing to the mold's shape is specifically not allowed.
- C.4.3
- Ballast: The ballast shall not be altered in profile or in any other way than by fairing
to the shape of the production mold.
- C.4.4
- Rudders: The rudders shall not be altered in profile or in any other way than by fairing
to the shape of the production mold.
- C.4.5
- Spars: Mast shall be carbon construction and boom shall be aluminum alloy extrusions
with continuous fixed grooves integral with their sections, and shall be produced only
by a manufacturer who is at that time approved by the Builder and Association.
- C.5
- EQUIPMENT REQUIRED
- C.5.1
- All Class Required Equipment defined in Section C.5.2 and C.5.3 shall be aboard and
in its proper location while racing in any Class regatta. Specified weights may be installed
in substitution for certain items of Class Required Equipment as specified in C.5.4 and
C.5.5.
- C.5.2
- Each item of Class Required Equipment shall be in accordance with the designs and specification
of the Builder, or, in the case of expendable items, of at least equal weight and in
the same location. Built-in interior equipment supplied with the "Standard Base" Schock
40 sailboat shall not be removed.
- C.5.3
- List of Class Required Equipment
- C.5.3.a
- Auxiliary propulsion system.
- C.5.3.b
- Electrical system: Two mounted 90 amp-hr batteries, switches, harness, and lights (bow,
stern, navigation station, quarterberths, vanity, forepeak, cabin, and galley).
- C.5.3.c
- Galley: Furniture and sink, sink pump.
- C.5.3.d
- Navigation station: Standard navigation station.
- C.5.3.e
- Head: Enclosed head with marine water closet, head door, holding tank, cleanouts, through-hull
fittings, and all plumbing.
- C.5.3.f
- Through-hull fittings: 4 through-hull fittings shall be used (two for the head, one
for the galley) and none shall be blocked or covered.
- C.5.3.g
- Builder-provided companionway ladder.
- C.5.4.h
- Berths and cushions: Quarterberths and two mid-ship berth (and their 4-in cushion);
4-in cushions for navigation seat and back, and main-cabin seat backs; contoured cushions
for main cabin seats; and locker covers.
- C.5.3.i
- Safety equipment: Safety equipment specified by the U.S. Coast Guard and conforming
to PHRF Category IV guidelines is required.
- C.5.3.j
- Stanchions shall be 24 inches high, and be permanently located in Builder-supplied
positions.
- C.5.3.j.i
- The lower lifeline shall be adjusted so that any part of it shall be taught when pressed
downward.
- C.5.3.j.ii
- The anchor and chain shall weigh at least 26 lbs.
- C.6
- RIGGING
- C.6.1
- Standing rigging: Rigging of sizes supplied by the Builder shall be maintained.
- C.6.1.a
- Headstays shall not be adjusted while racing.
- C.6.1.b
- Load cells are not permitted.
- C.6.1.c
- Mast bend shall be created and controlled only by the setting of the Builder-defined
mast step in its standard range of positions, wedges and blocks at the partners, and
by the adjustment of the permanent backstay and checkstays. Blocks and wedges at the
partners shall not be changed while racing.
- C.6.2
- Running rigging.
- C.6.2.a
- No track(s) running in an athwartships direction shall be used for the purpose of adjusting
athwartships jib-lead position.
- C.7
- SAILS
- C.7.1
- General.
- C.7.1.a
- All sails used in Class races shall be measured, and have their dimensions and date
of manufacture written on them, and be signed by their sailmaker.
- C.7.1.b
- All sails shall conform to, and be measured according to Class Rules.
- C.7.1.c
- A maximum of 2 jibs, 1 jib top, 2 spinnakers, and 1 main shall be on board for class
races.
- C.7.1.d
- For handicap races, the sail inventory shall be amended to include any and all sails
permitted by the handicap fleet
- C.7.2
- Mainsails:
- C.7.2.a
- Mainsails must fit between the black bands on the mast and boom.
- C.7.2.b
- The maximum mainsail dimensions allowable are:
- P=44.5
E=17.8
Upper Girth = 8.5'
Mid Girth = 13.3
Maximum 6 Battens allowed and don't have to be evenly spaced.
- C.7.2.e
- Only one mainsail shall be aboard while underway in Class Races.
- C.7.3
- Headsails:
- C.7.3.a
- All Purpose Jib dimensions are:
-
- Max LP = 107%
Max LP= 14.9
Maximum 3 battens-must be evenly spaced.
- C.7.3.b
- Jib Top reachers dimensions are:
-
- Max LP = 155%
Max LP = 21.3
- C.7.4
- Spinnakers:
- C.7.4.a
- Spinnakers shall be made only of woven nylon cloth weighing not less than 5 oz. The
maximum sail area is 1575 square feet.
- C.7.6
- Emblem: The standard Schock 40 emblem, consisting of the red Schock script "S" with
the numerals 40 enclosed by its lower portion, shall be affixed to both sides of the
mainsail.
- C.8
- SPECIAL VARIATIONS ("GRANDFATHER CLAUSE")
- C.8.1
- Upon application by an Owner, the Board may grant a variation from these Rules to bring
existing conditions or variations in manufacture into compliance. The Board shall require
of the owner any modification it deems necessary to ensure that the Intent of these Rules
are not violated, and that the yacht's potential speed is not favorably affected. The
Measurer shall maintain a record of any such variation granted.